7
RECEIVER UNIT DESCRIPTIONS
1
Remote Ethernet Port
Connect a CAT-5 Cable from this jack to the remote device that needs an
Ethernet LAN connection. Up to 100BaseT speeds are supported.
2
DVI / RS-232 Link Connector
Connects the DVI and RS-232 signals from the Receiver Unit to the Sender Unit
using CAT-5e / CAT-6 cable.
3
USB Link Connector
Connects the USB signals from the Receiver Unit to the Sender Unit using a
second CAT-5e / CAT-6 cable.
4 USB
Indicator
This LED glows green when a USB source is connected to the Receiver Unit.
5
USB Output Connectors
Connect the USB remote devices, such as a keyboard and mouse, to these
ports.
6 RS-232
Port
Connect an RS-232 Serial Cable from this port to the device being controlled.
7 DVI
Out
Connect a display to this DVI-I connector.
8 Power
Indicator
This LED will glow red once the included 5V DC locking power supply has
been properly connected to the unit and the locking power supply has been
connected to an available electrical outlet.
9
5V DC Locking Power Connector
Connect the included 5 V DC locking power supply to this connector.