Gefen EXT-UHDV-KA-LANS-RX, User Manual, Page: 74 / 188

page | 62
Commands
A
dv
anc
ed Oper
ation
Command Description
#get_telnet_login
Displays the status of the Telnet login
#get_telnet_port
Displays the Telnet listening port
#get_telnet_welcome
Displays the Telnet welcome message
#get_udp_access
Displays the UDP access state
#get_udp_port
Displays the UDP listening port
#get_web_port
Displays the HTTP listening port
#set_gateway
Sets the gateway address
#set_ip_address
Sets the IP address
#set_ip_mode
Sets the IP mode
#set_net_mode
Sets the network casting mode
#set_netmask
Sets the subnet mask address
#set_remote_udp_access
Enables or disables remote UDP access
#set_remote_udp_ip
Sets the remote UDP IP address
#set_remote_udp_port
Sets the remote UDP listening port
#set_telnet_access
Enables or disables Telnet access
#set_telnet_login
Enables or disables the Telnet login
#set_telnet_pass
Sets the Telnet password
#set_telnet_port
Sets the Telnet listening port
#set_telnet_welcome
Sets the Telnet welcome message
#set_udp_access
Enables or disables UDP access
#set_udp_port
Sets the UDP listening port
#set_web_port
Sets the HTTP listening port
Command Description
#get_rx_channel
Displays the channel of the Receiver unit (Rx only)
#get_v
Displays the current video input status
#request_usb
Requests USB control when active per request is
enabled
r
Routes an input to a Receiver unit (Rx only)
v
Change the video input of Sender unit
Routing
A
dv
anc
ed Oper
ation