Gefen EXT-UHDV-KA-LANS-RX, User Manual, Page: 73 / 188

page | 61
A
dv
anc
ed Oper
ation
Command Description
#get_device_desc
Displays the device description
#get_discovery
Displays the current state of the discovery service
#get_discovery_mode
Displays the discovery read/write mode
#get_showme
Displays the status of the showme state
#set_device_desc
Sets the device description
#set_discovery
Enables or disables the discovery service
#set_discovery_mode
Sets the discovery mode
#set_showme
Enables or disables the “show me” feature
Command Description
#help
Displays a list of available commands
Command Description
#get_gateway
Displays the gateway IP address
#get_ip_address
Displays the IP address
#get_ip_mode
Displays the IP mode
#get_ipconfig
Displays the IP configuration information
#get_net_mode
Displays the network casting mode
#get_netmask
Displays the subnet mask address
#get_remote_udp_access
Displays the remote UDP access state
#get_remote_udp_ip
Displays the remote UDP IP address
#get_remote_udp_port
Displays the remote UDP listening port
#get_telnet_access
Displays the Telnet access state
Commands
Help
Network
Discovery Service
Important
Commands that are limited to a Sender or Receiver unit are marked as
“Tx only” and “Rx only”, respectively. Unless otherwise noted, commands can
be used when connected to either a Sender or Receiver unit.