Gefen EXT-UHDV-KA-LANS-RX, User Manual, Page: 64 / 188

page | 52
B
asic Oper
ation
Setting the Video Mode
The video mode can be changed using the Mode button or through the Web interface of
the Sender unit. Consecutively pressing the Mode button on the Sender unit will switch
between Graphic and Video mode.
Using the Web interface
1. Access the Web interface for the Sender unit.
2. Login as “Administrator” or “User”.
3. Click the Network tab.
4. Click the desired mode within the Picture Quality Mode window group. The default
setting is “Video”.
► Video Mode
If the HDMI signal is motion video, then click the Video button. This mode will
optimize the frame rate.
► Graphic Mode
If the HDMI signal is a static image, then click the Graphic button.
5. The selected mode will be displayed on the screen, as shown below.
6. Rebooting the Sender unit is not required for the changes to take effect.
Video Mode Graphic Mode
B
asic Oper
ation