Gefen EXT-UHDV-KA-LANS-RX, User Manual, Page: 62 / 188

page | 50
B
asic Oper
ation
5. Select the row and column positions using the Row Position and Column Position
drop-down lists.
6. Click the drop-down list, next to the Apply button, to select the desired host or client to
which these settings will be applied.
If the
All
option is selected, then all parameters will be transferred to all Receiver
units. For monitor count and bezel compensation in a video wall array of matching
displays, this is fine, but the row and position will also be copied. There is an option for
“This” unit that will apply to the current unit being interfaced with. The “This” option can
be used to precisely set the proper position of each unit but would require the user to
access the web interface of each unit to set. Alternatively, the drop-down will provide
a list of all connected host (Sender units) and clients (Receiver units). This process
allows the configuration of an entire video wall from a single unit.
Creating Video Walls
B
asic Oper
ation