Gefen EXT-UHDV-KA-LANS-RX, User Manual, Page: 48 / 188

page | 36
1. Access the Web interface for the Sender unit and login as “Administrator”.
2. Click the Functions tab.
3. Locate the Serial over IP group and change the RS-232 settings to match the
settings of the RS-232 device that is being used. In this case, we need to use the
settings from Table 2.1 (see previous page).
4. Make sure that the Enable Serial over IP box is checked.
5. Click the Apply button in the lower-right corner of the Serial over IP group.
B
asic Oper
ation
Using RS-232
Important
If Enable Serial over IP is not checked, then RS-232 pass-through will be
disabled.
B
asic Oper
ation