Gefen EXT-UHDV-KA-LANS-RX, User Manual, Page: 35 / 188

page | 23
B
asic Oper
ation
B
asic Oper
ation
Use the Block Video option on a Sender unit to prevent video from being transmitted to
each of the connected Receiver units ( multicast mode only). Use the
Mask Video
option to
selectively block video on the desired Receiver units.
► Mask Video
1. Access the Web interface of a Receiver unit by entering the IP address in the address
bar of the browser.
2. Login as “Administrator”.
3. Click the
Functions
tab.
4. Under the
Video over IP
window group, check the
Mask Enable
box to mask the
video. Deselect this check box to unmask (enable) video.
5. Click the Apply button within the Video over IP group.
6. Click the Reboot button at the bottom of the page.
7. Repeat steps 1 through 6 for each Receiver unit in the system.
Blocking & Masking Video