Gefen EXT-UHDV-KA-LANS-RX, User Manual, Page: 33 / 188

page | 21
B
asic Oper
ation
B
asic Oper
ation
Setting the Video Channel
3. Once the current channel is displayed, do one of the following:
• Press the - button to decrement the current channel number.
• Press the +/USB button to increment the current channel number.
4. To set the video channel on a Sender unit, use the Web interface. See Setting the
Channel using the Web Interface (page 19) for more information.
The illustration below shows one Receiver unit and three Sender units. The numbers
indicate the video channel for each unit. Here, the Receiver unit is currently set to
channel 2 and is receiving the signal from the Sender unit, set to channel 2.
To switch the channel, and view the source that is connected to the Sender on
channel 5, press and release the +/USB button to increment the video channel until
the display shows the number 5.
LAN
Receiver unit
Out
Sender unit
Sender unit
Sender unit
In
In
In
2
5
1
2
Channel: 05