Gefen EXT-UHDV-KA-LANS-RX, User Manual, Page: 23 / 188

page | 11
Ge
tting S
tar
ted
Installation & Configuration
18. Click the desired IP Mode button.
• If Static mode is selected, then enter the IP Address, Subnet Mask, and Default
Gateway. Contact your system administrator if necessary.
• If
DHCP
mode is selected, then the IP address, subnet mask, and default gateway will
be specified by the DHCP server.
19. Click the Apply button to save the changes. This operation will require a reboot.
20. Click the Reboot button near the bottom of the page.
21. Repeat steps 12 - 21 for each Sender and Receiver to be configured.
22. After the desired IP settings have been applied, set the video channel for each Sender
unit. See Setting the Video Channel (page 19 ) for more information.
Important
The use of a Gigabit switch with “jumbo frame” capability is required when
connecting the 4K Ultra HD HDMI & VGA KVM over IP to a network. The
switch should be set to greater than 8K.