Gefen EXT-UHDV-KA-LANS-RX, User Manual, Page: 15 / 188

page | 3
Ge
tting S
tar
ted
ID Name Description
8 Reset Press this button to reset the unit to factory-
default settings. See Performing a Factory
Reset (page 54 ) for more information.
9 VGA Out Connect a VGA cable from this connector
to a local VGA display. This port is used to
monitor either the HDMI or VGA input signal.
ID Name Description
10 Power Connect the included 5V DC locking power
supply to this power receptacle.
11 USB Connect a USB cable from the computer to
this USB port.
12 LAN (PoE) Connects the Sender unit to a PoE-capable
switch (or directly to the Receiver unit) using
shielded CAT-5e (or better) cable.
13 VGA In Connect a VGA cable from this connector to
a VGA source.
14 HDMI In Connect an HDMI cable from this connector
to the UHD/HD source.
15 Line In Connect a 3.5mm mini-stereo cable from the
Line Out port on the multimedia PC to this
port.
16 Line Out Connect a 3.5mm mini-stereo cable from this
port to the Line In port of a multimedia PC.
Power
RS-232
Off On
Prog Sel IR Out
IR In/Ext Prog Reset VGA Out
Link
4K Ultra HD HDMI & VGA KVM over IP S
®
EXT-UHDV-KA-LANS-TX
5V DC USB LAN (PoE) VGA In HDMI In Line In Line Out
10 11 12 13 14 15 16
Introduction