Gefen EXT-UHD600A-88, User Manual

Page: 62 / 232

page | 50
B
asic Oper
ation
B
asic Oper
ation
Menu System
► Setting the TCP Listening Port
a. From the TCP access screen, press and release the ▲ or ▼ buttons on the
front panel or on the IR remote control, to select the TCP Port option.
The current TCP port will be displayed.
b. Press the Enter button on the front panel or the OK button on the IR remote
control to edit the port number. The cursor will appear under the first digit
of the port number.
c. Press the ◄ or ► buttons on the front panel or on the IR remote control to move
between each digit in the port number.
d. Press the ▲ or ▼ buttons on the front panel or on the IR remote control,
to change the numerical value of the digit (0 - 9).
e. After the desired port number has been set, press the Enter button on the front
panel or the OK button on the IR remote control to save the change.
f. Reboot the matrix to affect changes.
tcp port:
23
tcp port:
00023
_
tcp port:
00023
_
tcp port:
00024
B
asic Oper
ation
B
asic Oper
ation