Gefen EXT-UHD600A-88, User Manual

Page: 32 / 232

page | 20
Using the IR Remote Control
1. Go to the routing screen . If the routing screen is not displayed, then press and
release the Back button on the IR remote control until the routing screen is displayed.
2. Select the desired output by pressing one of the Output buttons (A - H) on the
top-portion of the IR remote control. In this example, we will route Input 5 to Output D.
OK
Output
RMT-88A
Menu
Back
Down
Up
OFF 1
3
5 6
7
Input
8
4
2
Preset
Mask
Lock
A B
Power
C D Mute
E F Volume
G H
R0
3,1.5V
R0
3,
1.5V
ON
1 2
B
asic Oper
ation
B
asic Oper
ation
B
asic Oper
ation
B
asic Oper
ation
Routing Inputs to Output
3. Select the desired input by pressing one of the
Input buttons (1 - 8) on the lower-portion of the
IR remote control.
4. The routing process is complete.
out D :output D
A/V In:input 02
out D :output D
A/V In:input 05
Output buttons
Information
The front panel display will only show activity if a routing operation is being
performed on the output that is displayed. Otherwise, the routing operation is
performed in the background. To verify that the new routing state has been
executed, you can view the current routing state for that output. See Viewing
the Routing Status (page 17) for more information.
Down
button