Gefen EXT-UHD600A-88, User Manual

Page: 110 / 232

page | 98
B
asic Oper
ation
► UDP Settings
For details on configuring UDP, see Using Telnet, UDP, and RS-232 (page 112) .
• UDP Access : Click the Enable button to use the UDP protocol with the matrix.
Otherwise, click the Disable button.
• UDP Port : Enter the TCP listening port in this field.
• Remote UDP Access : Click the Enable button to set the remote UDP address
and UDP listening port. This feature only needs to be enabled if feedback to the
matrix is required. Otherwise, this feature can be disabled .
• Remote UDP IP Address : Enter the remote UDP IP address in this field.
• Remote UDP Port : Enter the remote UDP listening port in this field.
The Web Interface
B
asic Oper
ation