Gefen EXT-UHD600-41 User Manual Download Page 46

Page: 46 / 136

page | 36

►

UDP Settings

For details on configuring UDP, see

Using Telnet, UDP, and RS-232 (page 48)

•

UDP Access

: Click the

Enable

button to use the UDP protocol with the switcher.

Otherwise, click the

Disable

button.

•

UDP Port

: Enter the TCP listening port in this field.

•

Remote UDP Access

: Click the

Enable

button to set the remote UDP address

and UDP listening port. This feature only needs to be

enabled

if feedback to the

switcher is required. Otherwise, this feature can be

disabled

•

Remote UDP IP Address

: Enter the remote UDP IP address in this field.

•

Remote UDP Port

: Enter the remote UDP listening port in this field.

asic Oper

ation

The Web Interface

asic Oper

ation

Summary of Contents for EXT-UHD600-41









































































































































Search results

Summary of Contents for EXT-UHD600-41

Reviews:

Related manuals for EXT-UHD600-41

Brands by name

Popular brands

Gefen EXT-UHD600-41, User Manual

Search results

Summary of Contents for EXT-UHD600-41

Reviews:

Related manuals for EXT-UHD600-41

Brands by name

Popular brands