Gefen EXT-UHD600-41 User Manual Download Page 36

Page: 36 / 136

page | 26

►

Using a Custom EDID

The

User-defined

setting is used to store a custom EDID in the selected input.

To use a custom EDID, follow the instructions below:

Select

User-defined

from the drop-down list of the desired input.

Copy or upload an EDID to the input that is using the

Custom

mode.

See one of the following sections for more information on copying or

uploading EDID data:

►

Copying EDID Data (page 27)

►

Uploading and Downloading EDID Data (page 30)

Set the EDID Lock mode to either

Locked

Unlocked

►

Locked

Prevents the EDID from being changed on the input..

►

Unlocked

Allows the EDID to be changed.

The name of the custom EDID will appear under the

EDID Name

column.

asic Oper

ation

asic Oper

ation

The Web Interface

asic Oper

ation

asic Oper

ation

Summary of Contents for EXT-UHD600-41









































































































































Search results

Summary of Contents for EXT-UHD600-41

Reviews:

Related manuals for EXT-UHD600-41

Brands by name

Popular brands

Gefen EXT-UHD600-41, User Manual

Search results

Summary of Contents for EXT-UHD600-41

Reviews:

Related manuals for EXT-UHD600-41

Brands by name

Popular brands