10
Installation
Connection Instructions
►
Video
1.
Connect the included HDMI cable between the 4K source and the Input port on the
Sender unit.
2. Connect a 4K display to the Output port on the Receiver unit, using the included HDMI
cable.
►
Fiber
3. Connect a single SC-terminated OM3 or better (50/125 μm) multimode fiber optic cable,
up to 660 feet (200 meters), between the Link port on the Sender unit and the Link port
on the Receiver unit.
►
Power
4. Connect the included 5V DC power supplies to the 5V DC port on both the Sender and
Receiver unit.
5. Connect the opposite end of the power supplies to available electrical outlets.
6. Alternatively, you can use the USB-to-DC cables that are also included. Make sure that
the USB port is powered and can supply 5V DC at 2A.
►
Indicators
7. The Link indicators on both units will light once all connections are complete and the
units, the source, and the display are powered up.