Gefen EXT-HDMI1.3-CAT6-8X, User Manual, Page: 23 / 66

19
Routing Sources using the Optional RMT-8IR Remote Unit
(Matrix Mode)
There are a total of 8 buttons on the RMT-8IR remote, which represent each of
the 8 buttons on the Receiver unit.
Example 1
:
Route the source connected to HDMI In 3 (from the 8x8 Matrix) on
the Sender unit to the display connected to HDMI Out 2.
Point the Remote at the Receiver unit connected to Display 2, then press button
3 on the RMT-8IR.
Table of IR Remote Commands
for the Optional RMT-8IR Remote Unit
RMT-8IR Button Source
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
The RMT-8IR remote control unit will allow the selection of any input (source) on
the 8x8 Matrix unit can be will be routed to any of eight Receiver units. Use the
information in the table above when routing the desired input to a display.
CONNECTING AND OPERATING THE
8X CAT6 EXTENDER FOR HDMI