Gefen EXT-HDMI1.3-CAT6-8X, User Manual, Page: 18 / 66

14
Setting the IR Remote Channel on the RMT-8IR
In the event that IR commands from other remote controls con fl ict with the
supplied RMT-8IR Remote, changing the remote IR channel will fi x this issue.
The RMT-8IR Remote has a bank of DIP switches for setting the Remote IR
channel.
The DIP Switch bank on the RMT-8IR is located underneath the battery cover.
RMT-8IR REMOTE CONFIGURATION
1 2 1 2
1 2
1 2
Remote Channel 3:
Remote Channel 1:
Default
Remote Channel 2:
Remote Channel 4:
Left:
Picture of the opened rear battery
compartment of the RMT-8IR remote showing
the exposed DIP Switch bank between the
battery chambers.
The IR channel selected on the RMT-8IR Remote must match the IR channel
assigned to the 8x CAT6 Extender for HDMI. For example, if you set both DIP
switches on the remote to the down position (IR channel 1), you must set the 8x
CAT6 Extender for HDMI to use IR channel 1.
Please refer to page 36 and 47 on how to change the IR channel on the 8x CAT6
Extender for HDMI.