FORCE RGB AND PRE-PROGRAMMED EDID FEATURES
DIP switch 1 on the 4-bank DIP switch located on the underside of receiver unit
enables and disables the automatic equalization function. Additional features can
be enabled by using the other DIP switches on this bank.
FORCING THE RGB COLORSPACE
In some cases, the output video may have a pink or green tint. This usually is
attributed to the output device (i.e. display) not supporting the colorspace being used
by the source device. All digital displays will handle the standard RGB colorspace.
DIP switch 2 can be enabled to force the output colorspace to RGB. If the input
colorspace is YCbCr, the colorspace will be converted to RBG prior to output on
the receiver unit.
USING THE PRE-PROGRAMMED EDID
In some cases it may be necessary to force an HDMI 1.2 EDID for troubleshooting
purposes. Enabling DIP switch 3 will force the use of a pre-programmed EDID to be
sent to the source instead of the connected output device (i.e. display). The EDID
specifi cs are listed below.
Resolution
Timing
640x480
60Hz
720x480i/p
59.94/60Hz
720x576i/p
50Hz
1280x720p
50Hz
1280x720p
59.94/60Hz
1920x1080i/p
50Hz
1920x1080i/p
59.94/60Hz
Audio Format
Channels
Frequency
LPCM
2
32/44.1/48 kHz
ADDITIONAL DIP SWITCH FUNCTIONS
8