page | 16
Setting the IP Mode
The DVI KVM over IP can be set to
Auto IP
,
DHCP
, or
Static IP
mode. By default, the DVI
KVM over IP is shipped in
Auto IP
mode.
1.
Access the Web interface by entering the IP address of the desired Sender or
Receiver unit. Refer to
Displaying the IP Address
if necessary.
2. Click the
Network
tab. The current IP Mode will be highlighted within the
IP Setup
window group. In the illustration below,
Auto IP
button is highlighted.
3.
Click the desired IP Mode button.
4. Click the
Save
button on the right-hand side of
IP Setup
window group.
5. Click the
Reboot
button near the bottom of the page.
6. Access the Web interface for the Receiver unit by entering its IP address.
7.
Repeat steps 2 - 5 for each Sender and Receiver to be changed.
Operating the DVI KVM over IP
Basic Operation
Summary of Contents for EXT-HDKVM-LAN
