Gefen DVI-1500HD, User Manual, Page: 16 / 24

page | 6
Page Title
Connecting the DVI 1500HD
1. Connect the included DVI cable from the source to the DVI In port on the Sender unit.
2. Connect a DVI cable from the display to the DVI Out port on the Receiver unit.
3. Connect 4 strands of LC-terminated multimode fiber optic cable from the Sender
unit to the Receiver unit. Remove the protective rubber covers to expose each
of the LC ports.
4. OPTIONAL: If HDCP content will be used, connect a CAT-5e cable between the
DDC port on the Sender and Receiver unit.
When extending HDCP content, the maximum extension distance for the fiber optic
and CAT-5e cable is 330 feet (100 meters).
5. Connect the included locking 5V DC power supplies to the power receptacles on both
the Sender and Receiver unit. Do not overtighten the locking connectors.
Getting Started
Installation
IMPORTANT:
Each fiber optic port is identified by the letter R,G,B,
and C. Make sure that the fiber optic cables between the Sender
and Receiver unit are connected to the proper port, as shown below.