Gefen TOOLBOX GTB-HD4K2K-444-BLK, User Manual, Page: 46 / 114

page | 36
Commands
Advanced Operation
#set_udp_remote_ip
The #set_udp_remote_ip command sets the remote UDP IP address. The IP address
must be specified using dot-decimal notation. The default UDP remote IP address is
192.168.1.255 . The matrix must be rebooted after executing this command.
Syntax :
#set_udp_remote_ip param1
Parameters :
param1 UDP address
Example :
#set_udp_remote_ip 192.168.1.227
REMOTE UDP IP ADDRESS 192.168.1.227 IS SET.
#set_udp_remote_port
The #set_udp_remote_port command sets the remote UDP listening port. The default
remote UDP listening port is
50008
. The matrix must be rebooted after executing this
command.
Syntax :
#set_udp_remote_port param1
Parameters :
param1 Port [0 ... 65535]
Example :
#set_udp_remote_port 50008
REMOTE UDP COMMUNICATION PORT 50008 IS SET.