Gefen TOOLBOX GTB-HD4K2K-442-BLK, User Manual

Page: 76 / 114

page | 66
#show_r
The #show_r command displays the current routing status of the output. The name of the
output and input are displayed.
Syntax :
#show_r param1
Parameters :
param1 Output [1 ... 2]
Example :
#show_r 2
OUTPUT 2(Sony_XBR) IS ROUTED TO INPUT 3(Blu-ray)
r
The r command routes the specified input to the output. Do not precede this command
with the “
#
” symbol. Also see the
s
command. If param1 = 0, then the specified input will
be routed to all outputs. param3 is optional but can be used to specify another output on
the command line.
Syntax :
r param1 param2 [param3]
Parameters :
param1 Input [0 ... 4]
param2 Output [1 ... 2]
param3 Output [1 ... 2]
Example :
r 3 1 2
INPUT 3 IS ROUTED TO OUTPUT(S) 1 , 2
Commands
Advanced Operation