a. In normal mode, press this button to switch rainfall display mode(NOW, HOUR, DAY,
WEEK, MONTH, YEAR, TOTAL).
b. In the current display mode, press and hold this button to clear this group of data
(RESET).
20. Battery Compartment 3xAA (batteries not included)
21. Wireless signal indicator (Flashes when data is being sent to the display unit)
22. Compartment 2xAA batteries (batteries not included)
23. Wireless signal indicator(Flashes when data is being sent to the display unit)
24. Integrated hang hole
25. Compartment 2xAAA batteries (batteries not included)
26. TX channel selector, select external sensor channel (Maximum 3 channels available)
Package Contents:
1. Display Unit
2. Outdoor Sensor
3. Wireless rain gauge
4. Instructions Manual
Getting started:
1.Place 3xAA batteries into the display unit.
2. Place 2xAA batteries into the wireless rain gauge.
3. Place 2xAA batteries into the outdoor sensor.
Note:
• The range is 200 ft. (60m) unobstructed. The wireless range may be reduced by trees,
walls, windows, etc.
Installing or Replacing Batteries:
• We recommend using high quality alkaline batteries for the best product performance.
• Heavy duty or rechargeable batteries are not recommended.
•The outdoor sensor requires high quality alkaline batteries in low temperature conditions.
Cold temperatures could cause other batteries to function improperly.
• Do not mix old and new batteries. Do not mix alkaline, standard, and/or rechargeable
batteries.
Low Battery Indicator:
If the low battery indicator is displayed on the LCD for either the outdoor sensor or the
display unit, immediately change the batteries to prevent disruptions in communications of
the devices.
Default settings:
1. Default time: 12:00 (Time form: 12H)
2. Default date: 01/01 (Year: 2021, date form: D/M- unchangeable)
3. Default week: FRI (Language: EN, 7 languages can be selected)
4. Default temperature: °F
6. Rainfall unit: IN
7. Default alarm: AM 6:00(ALARM1), AM 8:00(ALARM2), default: off, default snooze time:
5min.
Operation:
Manually Setting the Time, Date & Units:
• Press and hold the
MODE
button for 3 seconds until the display begins to flash.
• Set the following information in the order listed:
• BEEP(button sound)
• Rainfall unit
• Temperature unit
• Year
• Month
• Date
• Hour
• Minute
• Day of the week language: English, German, French, Italian, Spanish, Dutch and Swed-
ish(Display the first 6 letters of the word).
• To select individual values, press
UP
button or
DOWN
button and confirm each selection
by pressing the MODE button.
Note:
You will automatically exit settings mode if no buttons are pressed for 20 seconds.
Setting the alarm:
• In standard mode, press
ALERT
button to enter the alarm mode. The setting order is
ALARM1 > ALARM2 > ALERT > Exit.
• In “ALARM1/ALARM2” mode, press
MODE
button to turn on/off ALARM1/ALARM2. The
alarm icon or will appear to disappear. Press and hold the
ALERT
button to enter
the alarm setting mode, the setting order is Hour > Minute > Exit. Use the
UP
and
DOWN
button to set the required hour and minute.
• Press
ALERT
(or no key for 20 seconds) so exit and save the setting.
• To select individual values, press
UP
button or
DOWN
button and confirm each selection
by pressing the
ALERT
button.
• If you do not make an entry for 20 seconds, setting mode is exited automatically.
Stopping the alarm/snooze function
• When the alarm is triggered, the alarm symbol or begins to flash and an alarm
sounds.
• By pressing any button (except the
LIGHT/SNOOZE
button to stop the alarm. Otherwise, it
will stop automatically after 2 minutes.
Note:
While the alarm signal is sounding, press the
LIGHT/SNOOZE
button to activate the snooze
function. In snooze mode, the backlight is on for 5 seconds.The alarm will sound after 5
minutes.
Setting the rainfall alert:
• In standard mode, press
ALERT
button to enter the alarm mode. The setting order is
ALARM1 > ALARM2 > ALERT > Exit.
• In “ALERT” mode, press
MODE
button to turn on/off ALERT. The alert icon will appear
to disappear. Use the
UP
and
DOWN
button to set the required rainfall alert value.
• The rainfall alert refers to 24-hour rainfall, not affected by other modes.
GEEVON Rain Gauge
Item No.W208708
User Manual
Thank you for purchasing W208708 Rain Gauge.
Please take a moment to read this guide and store it for future
reference.
Controls and displays:
1. Time display
2. Calendar
3. Indoor temperature
4. Outdoor sensor low battery display
5. Outdoor temperature
6. Rainfall history display
7. Rainfall display
8. Main unit low battery display
9. Alarm icon
10. Weekday
11. Temperature/humidity MAX/MIN records
12. Indoor humidity
13. Rainfall alert
14.
LIGHT/SNZ
button
a. In normal mode, press this button to turn on/off the backlight for 5 seconds.
b. In the setting mode, press this button to exit the settings.
c. Press this button to enter the snooze mode when Alarm rang.
15.
MODE
button
a. In normal mode, press this button to switch time format 12H/24H.
b. In ALARM or ALERT display mode, press this button to turn on/off ALARM/ ALERT.
c. In normal mode, press and hold this button to enter time setting mode.
d. In the setting mode, press this button to confirm.
16.
ALERT
button
a. In normal mode, press this button to select ALARM1, ALARM2, rainfall ALERT.
b. In the alert mode, press and hold this button to set ALARM1, ALARM2, rainfall ALERT.
17.
UP
button
a. In normal mode, press this button to view the rainfall history (except NOW, TOTAL).
b. In the setting mode, press this button to increase in value.
c. In the setting mode, press and hold this button to increase in value quickly.
18.
DOWN
button
a. In normal mode, press this button to switch to display MAX/MIN temperature and humidity
record.
b. In MAX/MIN display mode, press and hold this button to clear MAX/MIN memory.
c. In normal mode, press and hold this button to receive RF.
d. In the setting mode, press this button to increase in value.
e. In the setting mode, press and hold this button to increase in value quickly.
19.
RAIN
button
15
16
17
18
19
20
21
1
8
9
2
24
25
22
23
26
27
3
4
5
6
7
10
11
12
13
14
