Geermarc Ampli200+, User Manual, Page: 7 / 15

7
1 - ANSWERING INCOMING CALL
Without headset:
- When an incoming call is received, the phone will ring, to answer the call
lift the andset and speak.
- On completion of the call, carefully replace the handset in the cradle to
release the line.
With headset (option):
- When an incoming call is received, and if you wish to answer the call with
the headset, press the
SPKR button and speak.
- On completion of the call, press the SPKR button again to release the
line.
In handsfree mode:
- When an incoming call is received, the phone will ring, to answer the call
press the
SPKR button.
- On completion of the call, press the SPKR button to release the line.
2 - VOLUME AND TONE RECEIVING ADJUSTMENT
You can increase the volume and adjust the receiving tone according to
your own hearing requirements.The button
AMPLI allows extrareceiving
and tone functions to be activated or not during the conversation. When
the function is activated, the red light of extra receiving and tone function
located near the button
AMPLI is lit. Adjust the TONE and VOLUME but-
tons to remove the level according to your own hearing requirements.
Note:
When the switch AMPLI located behind the phone is ON , the extra-receiv-
ing and tone functions are automatically activated each time you use the
phone.When the switch
AMPLI is switched OFF , you will need to activate
the function by pressing the button AMPLI . Tone and volume adjustment
(15dB to 30dB) is only activated when the button is set to ON. When this
button is set to OFF only the volume can be adjusted from 0dB to 15dB
USING THE PHONE