1 2
QUICK USER GUIDE
!!! Please refer to our website: www.geemarc.com for an
up to date user guide, as there may be important
updates and changes you need to be aware of !!!
CAUTION :
Use only the battery provided. There may be a risk of
explosion if a wrong type of battery is used for the parent unit. The
battery cannot be subjected to high or low extreme temperature and
low air pressure at high altitude during use, storage or transportation.
Disposal of battery into fire or a hot oven, or mechanically crushing or
cutting or the battery can result in an explosion. Leaving the battery
in an extremely high temperature surrounding environment can result
in an explosion or the leakage of flammable liquid of gas. Battery
subjected to extremely low air pressure may result in an explosion
or the leakage of flammable liquid or gas. Dispose of used battery
according to the instructions.
Normal operating temperature for the product (e.g. 0
o
C ~ 40
o
C).
Use only the battery listed below.
Alkaine Batteries : TYPE: AA 1.5V x 2 pcs.
IMPORTANT SAFETY INSTRUCTIONS
When using your doorbell equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and injury, including the following.
1.Read and understand all the instructions.
2.Follow all warnings and instructions marked on the product.
3.Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
4.Do not expose the product to direct sunlight or extreme cold
environment. Do not put the product close to heating sources
such as radiators, cookers, etc.
5.Unplug this product from the wall outlet and refer servicing
to the distributor under the following conditions:
If the product does not operate normally by following the
operating instructions.
If the product has been dropped and the cabinet has been
damaged.
If the product exhibits a distinct change in performance.
6.Do not use the doorbell near a gas leak.
7.Please note the correct polarity while inserting the batteries.
GETTING STARTED
Package contents
The package contains the following items:
Doorbell, AA batteries x 2, User guide, Screws and Anchors
Install batteries to the Doorbell
1. Remove the screw in the bottom.
2. Push to remove the wall mount cover at the back.
3. Install two AA batteries into the battery compartment,
matching the polarity markings (+ and -) inside the battery
compartment.
4. Push to attach the wall mount cover back to the battery
compartment and insert the screw.
REGISTRATION
Registration
If you are buying an additional doorbell, follow the procedure
in next chapter.
If your doorbell is sold with the AMPLIDECT595 U.L.E in pack
format, you do not need to register.
Easy Registration for Audio Doorbell
1. Make sure the doorbell is powered on with batteries before
registering it to the telephone base.
2.
Press and hold
/
Handset locator
key on the
telephone AD595 ULE base until you hear a beep.
3.
Press and hold
the pairing button of the Audio Doorbell
until the blue LED light flashes. The Audio Doorbell is now
registering to the AMPLIDEDT595 U.L.E.
Microphone
LED light
Chime button
Pairing button
Speaker
Input voltage 6V/DC
Screw