Geemarc combi dect 295 User Manual Download Page 68

Page: 68 / 77

9.5.10.2

Activate or Deactivate the Remote access

Using a handset:

1. Press

MENU/OK

and

to select

ANS. MACHINE

2. Press

and

to select

TAM SETTINGS

3. Press

and

to select

REMOTE ACC

4. Press

and

to select

OFF

to turn on or off the remote access

respectively.

5. Press

to confirm.

Using the base:

1. Press

MENU/OK

and

to select

ANS. MACHINE

2. Press

MENU/OK

and

to select

TAM SETTINGS

3. Press

MENU/OK

and

to select

REMOTE ACC

4. Press

MENU/OK

and

to select

OFF

to turn on or off the remote

access respectively.

5. Press

MENU/OK

to confirm.

9.5.10.3

Reset TAM to Default Settings

Using the base:

1. Press

MENU/OK

and

to select

ANS. MACHINE

2. Press

MENU/OK

and

to select

TAM SETTINGS

3. Press

MENU/OK

and

to select

TAM DEFAULT

4. Press

MENU/OK

and then enter the correct system PIN (default PIN is 0000).

5. Press

MENU/OK

to restore the TAM settings to default.

Summary of Contents for combi dect 295














































































Search results

Summary of Contents for combi dect 295

Reviews:

Geemarc combi dect 295, User Manual, Page: 68 / 77

Search results

Summary of Contents for combi dect 295

Reviews: