Geemarc combi dect 295 User Manual Download Page 50

Page: 50 / 77

8.4

Base Settings using the Handset

8.4.1

Set the Ringer Melody

You can set special melody to personalize your base external ringer. A total of
5 melodies are provided for your selection.

1. Press

MENU/OK

and

to select

BS SETTINGS

2. Press

and

to select

BS RINGER

3. Press

and

to select the desired ringer melody.

4. Press

to confirm.

8.4.2

Set the Ringer Volume

You can set the base ringer volume level. A total of 6 ringer volume levels including

VOLUME OFF

are provided for your selection.

1. Press

MENU/OK

and

to select

BS SETTINGS

2. Press

and

to select

RING VOLUME

3. Press

and

to select the desired volume level.

4. Press

to confirm.

NOTE:

The respective ringer volume will be played during your selection. If

VOLUME OFF

selected,

icon will display.

8.4.3

De-register a Handset

You are requested to enter the 4-digit PIN in order to de-register a handset from the
base station. The

on the de-registered handset will be off.

NOTE:

You cannot de-register the handset that you are currently using.

1. Press

MENU/OK

and

to select

BS SETTINGS

2. Press

and

to select

DELETE HS

3. Press

and you are requested to enter the 4-digit system PIN.

4. Enter the 4-digit system PIN (0000 by default).

5. Press

and a list of registered handsets will be displayed.

6. Press

to select one of the handsets that you want to de-register.

7. Press

to confirm.

SET

Summary of Contents for combi dect 295














































































Search results

Summary of Contents for combi dect 295

Reviews:

Brands by name

Popular brands

Geemarc combi dect 295, User Manual

Search results

Summary of Contents for combi dect 295

Reviews:

Brands by name

Popular brands