manualshive.com logo in svg

Geely Emgrand 2015, Manual

The Geely Emgrand 2015 is a stylish and efficient vehicle that offers exceptional performance on the road. To make the most of your driving experience, download the free user manual from our website. This comprehensive manual provides detailed instructions and insights to ensure you maximize the potential of your Geely Emgrand 2015.

Share
Download
background image

182

Service and Maintenance

Battery

This vehicle is equipped with a mainte-      
nance-free battery. Refer to "Engine Com-     
partment" in Section 7 "Service and 

 

 

 

 

Maintenance" for the position of the battery.

Battery posts, terminals and related    
accessories contain lead and lead 

 

 

 

compounds which can cause cancer and     
damage the reproductive system. There-    
fore, wash hands after touching them.

Using and Maintenance of Bat-    
tery

To extend the  life of  vehicle's battery  and       
maintain the normal operation of the vehi-      
cle's electrical system, some suggestions    
are provided for you in the following:

•

Prevent overcharging the battery or pre-     
vent the battery from discharging for a      
long time.

•

The external charging should be per-     
formed  as  soon  as  possible  when  the      
battery voltage becomes insufficient   
and the lighting becomes dark, and the      
starting seems weak.

•

The battery should be kept away from      
hot source and open flame. Keep good      
ventilation conditions while charging or    
using it to avoid injuries caused by fire.

•

To prevent the battery from discharging     
a large current for a long time, the start-        
ing  time  should  not  excess  5  seconds      
each  time.  The  interval  time  between     
two times of continuous starting should     
be within 10 to 15 seconds.

•

The battery should be securely installed     
on the vehicle to reduce vibration.

•

Frequently check if the battery post     
clamps are securely and well connected     
to prevent sparks, which could result in      
battery explosion. The oxides and sul-     
fates produced by the battery clamps     
must  be  scraped  off  and  the  clamps      
should be coated with petroleum jelly to      
prevent re-rusting.

When  the  vehicle  is  driven  in  cold  areas,       
discharged battery should be avoided to     
prevent the electrolyte from freezing.

Inspection of Battery

This  vehicle  is  equipped  with  a  mainte-      
nance-free battery, and it is not necessary      
to add battery solution.
One type of battery is not equipped with an        
inspection hole (See below). You should     
contact the Geely Service Station for the      
inspection of the battery regularly.

The another type is equipped with an 

 

 

 

 

 

inspection hole on the top (See below). 

 

  

 

 

Please check the inspection hole for the      
battery charge status regularly.

Summary of Contents for Emgrand 2015







































































































































































































































Reviews:

No comments

Related manuals for Emgrand 2015

Jacobsen Cushman Turf Truckster Parts & Maintenance Manual preview
Cushman Turf Truckster
Brand: Jacobsen Pages: 210
Saleen 10-8002-C11998B Installation Manual preview
10-8002-C11998B
Brand: Saleen Pages: 12
Buick 2013 Buick Verano Manual preview
2013 Buick Verano
Brand: Buick Pages: 5
TATA Motors nano genX Owner'S Manual preview
nano genX
Brand: TATA Motors Pages: 156
EUFAB 12015 Manual preview
12015
Brand: EUFAB Pages: 12
Ford Windstar 2003 Quick Reference Manual preview
Windstar 2003
Brand: Ford Pages: 2
Safe Fleet RVS-082550 Instruction Manual preview
RVS-082550
Brand: Safe Fleet Pages: 11
Camec 042374 User Manual preview
042374
Brand: Camec Pages: 19
RAM 2012 Truck Chassis cab Owner'S Manual preview
2012 Truck Chassis cab
Brand: RAM Pages: 506
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
Safe Fleet PRIME DESIGN HRR-369-E-UM3-96 Manual preview
PRIME DESIGN HRR-369-E-UM3-96
Brand: Safe Fleet Pages: 12
Kocchi's 772161M1 Manual preview
772161M1
Brand: Kocchi's Pages: 4
Prorack K623 Fitting Instructions Manual preview
K623
Brand: Prorack Pages: 15
Jaeger 12160509J Fitting Instructions Manual preview
12160509J
Brand: Jaeger Pages: 16
SAFARI SS18HF Manual preview
SS18HF
Brand: SAFARI Pages: 5
Whispbar K481W Fitting Instructions Manual preview
K481W
Brand: Whispbar Pages: 14
Lexus 2010 RX 350 Warranty And Services Manual preview
2010 RX 350
Brand: Lexus Pages: 82
Brodit ProClip 833995 Manual preview
ProClip 833995
Brand: Brodit Pages: 2

Brands by name

Popular brands

Load more brands