1
2
3
4
5
6
7
8
In an Emergency
151
Spare Tire
The spare tires are kept under the driver's
tool box in the trunk.
After the removal of the jack, turn the lock-
ing knob towards the direction of rotation
arrow on the tool on-board and you can
take down the spare tire together with the
driver's tool kit. And then place the spare
tire near the tire to be replaced.
Removing Flat Tire and Install-
ing Spare Tire
1.
Before the next operation, please take
the safety inspection.
2.
Take out the plastic plier from the
driver's tool kit, and then clamp the nut
decorating cap of the tire and pull down
the cap outward.
3.
Set the wheel wrench on the wheel nut
and rotate it counterclockwise, and then
loosen all wheel nuts around a circle,
but do not remove the nuts, as shown in
the picture.
4.
Place the jack head, and adjust the jack
at the suitable height before placing the
jack under the lifting point as shown in
the picture.
When lifting vehicle, the wrong posi-
tion of the jack support may do dam-
age to the vehicle and even cause the
vehicle to fall. To avoid personal injury and
damage of vehicles, be sure that the jack
head is in the right position before lifting the
vehicle.
