Geely EC715 2009, Workshop Manual, Page: 718 / 2181

2. Acceleration Pedal Position Sensor Technical Specifications
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
0 5 10 15 20
4.59V
2.30V
0.38V
0.75V
Output Voltage
(V)
Accelerator Pedal Turning Angle
(
°
)
FE02-5235b
Note
When test the above APP sensor output signals, use an oscilloscope. the output waveform of the circuit should be
smooth and without other waveforms. If the acceleration pedal rotates to an angle and the output signal drops to zero
or drops rapidly, replace the APP. APP is an assembly. Do not disassemble it to repair.
2.12.7.14 DTC Code Index
DTC code Description Diagnostic Procedures
P0011 Intake VCP Valve Timing Response Lag
Refer to 2.12.7.15 DTC P0011 P0012
P0016 P0026
P0012 Intake VCP Camshaft Valve Timing Error
P0016 Intake VCP Camshaft Gear Learn Bias Out Of Range
P0026 Intake VCP Hydraulic Control Valve
P0068 Electronic Throttle Air Flow Error Refer to 2.12.7.16 DTC P0068 P0106
P0076
Intake VCP Hydraulic Control Valve Coil Low Voltage or
Open Circuit
Refer to 2.12.7.17 DTC P0076 P0077
P0077 Intake VCP Hydraulic Control Valve Coil High Voltage
P0106 Intake Pressure / Throttle Position Fault Refer to " 2.12.7.16 DTC P0068 P0106
2-636 Control System JL4G15-D Engine
EC718/EC718RV EC715/EC715RV 10/2009