2.6.7 Diagnostic Information and Procedures
2.6.7.1 Diagnosis Description
Get familiar with the system functions and operations before start system diagnostics, so
that it will facilitate the correct diagnostic steps, more importantly, it will also help to determine whether the customer described the
situation is normal.
2.6.7.2 Visual Inspection
–
Check installed aftermarket equipment that may affect the mechanical systems performance.
–
Check easy to access system components to identify whether there is a significant damage that may lead to the fault.
–
Confirm whether the engine oil level is normal and whether the engine oil viscosity is normal.
–
Record engine speed, ambient temperature and other specific factors.
–
Compare with a known good engine to check whether the current engine status is normal.
2.6.7.3 Comprehensive Engine Inspections
1. Check engine coolant.
Engine Coolant Discharge and Filling
.
2. Check engine oil.
Engine Oil Pressure Diagnostic and Test
.
3. Check the battery.
Charging System Description and Operation
4. Check the spark plug.
5. Check the air filter.
Charging System Description and Operation
6. Check the ignition timing.
Check the ignition timing. The following conditions must be met:
–
Engine reaches normal working temperature.
(1). Use scan tool to test methods:
Step 1
Connect scan tool.
2-316
Engine Mechanical System JL4G18-D
Engine
EC718/EC718RV EC715/EC715RV 10/2009
Summary of Contents for EC715 2009
Page 4: ......
Page 330: ...Next Step 10 End 2 248 Fuel System JL4G18 D Engine EC718 EC718RV EC715 EC715RV 10 2009 ...
Page 1164: ......
Page 2008: ......