6.
According to steps 1 and 2, re-check the power steering
fluid level to ensure that when the system reaches the
normal operating temperature and stabilize, the fluid level
reaches "MAX". if necessary, add proper amount of fluid.
7.2.8.8 Check Power Steering Fluid
–
Power steering fluid level is indicated through the scale on
the transparent power steering reservoir.
–
If the steering fluid reaches normal working temperature,
the fluid level should be between the MAX (maximum) and
MIN (minimum). if necessary, add steering fluid.
–
If the steering fluid temperature is low, the fluid level should
be at the MIN (minimum) mark. If necessary, add steering
fluid.
7.2.8.9 Power Steering Pipe Assembly with
Fluid Reservoir Replacement
Removal Procedure:
FE07-0016b
1.
Drain the power steering fluid from the power steering fluid
reservoir.
2.
Remove the fluid reservoir from the power steering fluid
reservoir bracket, remove the power steering pipe
assembly.
FE07-0017b
3.
Release the power steering hose clamp and remove the
hoses.
Steering System
Hydraulic Power Steering System
7-27
EC718/EC718RV EC715/EC715RV 10/2009
Summary of Contents for EC715 2009
Page 4: ......
Page 330: ...Next Step 10 End 2 248 Fuel System JL4G18 D Engine EC718 EC718RV EC715 EC715RV 10 2009 ...
Page 1164: ......
Page 2008: ......