GEEETECH
www.geeetech.com
Tel: +86 755 2658 4110 Fax: +86 755 2658 4074 – 858
Page
2
ShenZhen GETECH CO.,LTD
Preparation
1.
Unpack the kit and check that all parts have been supplied with the kit.
Check the condition of each part as there might be some damage during
shipping. To help you with this procedure we have supplied you with a bill
of materials (BOM) which can be found in the box. Each part has been
packed in a bag with an easily identifiable part number.
2.
Should you identify damaged, missing or incomplete parts, please contact our
customer service immediately by email or through the website. At the bottom
of the BOM, there is a signature of reviewer, please take a picture of it and
attach the picture in your mail.
3.
Read through each chapter of these instructions to gain an over-all idea of
what is involved and how long it might take, before starting on the work
described.
4.
Before you start, you can sort all the parts in order, this will save you time
especially when trying to identify individual screws and nuts. Take care not
to mix up these parts as they may appear to be very similar to each other.
5.
Ensure you have the necessary skills to carry out the work, or enlist the help of
someone who does.
6.
Work on a big firm table or bench in a clean dry well-lit area.
7.
This kit contains tiny parts; please keep them away from kids under 3.
8.
If you run into problems, ask for help – our contact details are on our website
and we will always do our best to resolve any problems you may encounter
quickly and efficiently.
9.
Due to parts upgrade and production batch is different, the pictures on the
manual might be a bit different with what you actually received, but the
function and installation will not be change. Geeetech reserves the right to
explain.