GEDA Battery Ladder Lift, Assembly And Instruction Manual

Page: 92 / 124

Maintenance – Checking – Cleaning
Assembly and instruction manual 92 / 124 BL164 GB Edition 07/2017
9.3 Function- and wear checks
WARNING
Danger of injury from components failing
Parts must be replaced immediately if the specified wear limits are
exceeded. Device operation is prohibited until the parts have been
replaced. All parts must also be checked for damage (deformation,
cracks, cavities, etc.).
9.3.1 Slack rope switch in the base unit
• Check for easy movement
• Verify the switching point of the limit switch
Check

Pull on the webbing and release.
The slack rope switch must turn
smoothly and bounce back on its
own.
9.3.2 Load carrying devices on the base unit
Check

Open the interlocking by hand
and release it.
The interlocking elements of the
load carrying device must open
easily and close on its own.
Oil if necessary or replace the
spring.