Operation
Assembly and instruction manual
58 / 124
BL164 GB Edition 07/2017
7.2.1
Checks before starting work
Check at least once a day for externally recognisable damage and
defects. If necessary, shut down and secure the device immediately.
•
Check the webbing guide and thus also the webbing break
protection for easy movement.
•
Carry out a test run without load and check whether the device
functions properly.
The BatteryLadderLIFT must stop immediately if
- the
STOP
button on the hand-held transmitter is pressed.
- the
UP
limit switch is enabled.
- the
DOWN
limit switch is enabled.
During the test run, check the webbing for signs of damage and
wear.
Summary of Contents for Battery Ladder Lift
Page 2: ......
Page 3: ...General information BL164 GB Edition 07 2017 3 124 Assembly and instruction manual...
Page 123: ......
