GEDA
®
3700 Z/ZP
For persons authorised to carry out assembly tasks
ML034 GB 2017 / 11
Page 7 of 60
Assembly Instructions
3
For persons authorised to carry out assembly tasks
3.1
Assembly, servicing / maintenance specialist
A person who, due to qualified professional education, training and
experience, is able to recognise risks and potential hazards during
work/assembly/maintenance/repair work on the machine or
subcomponents and can rectify these by introducing appropriate
measures.
3.2
Obligatory safety instructions whilst working with the machine
•
Also observe the safety notes in the instruction manual.
•
The machine must not be used as steps or a climbing aid. Only use
tested and stable steps/climbing aids. Keep steps/climbing aids free of
dirt and soiling.
•
At the end of work or if work is interrupted, the machine must be turned
off at the main switch and secured against unauthorised switch-on
(e.g. with a padlock).
3.3
Transportation of the machine
•
No persons must remain in the area below or on the raised
machine/parts of the machine.
•
Only lift the machine using the necessary parts and at the specified
mooring points.
•
The machine must only be transported/installed on foundations with a
sufficient load capacity.
•
Ensure that stable balance is maintained when transporting with forklift
trucks.
