GEDA
®
1500 Z / ZP
Page 90 of 114
Rev.: 004
BL 076 GB
Translation of the original operating manual
2011 / 03
15.5.4
Assemble EMERGENCY limit switch bar
An emergency limit switch bar (1) must be installed as top stop point
before the drive pinions leave the gear rack.
The hoist is stopped at this bar by the
UP
operating limit switch or the
emergency limit switch in case of an error.
Screw in the limit switch bar (1) with
the scaffolding clamp onto the circular
mast tube of the left (control side)
mast.
Mount the EMERGENCY limit switch bar
so that during operation the last mast
anchor can be exceeded by
- max. 6 m (platform A, C-I)
- maximum 2 m (platform B, BS, BL,
BLL).
The distance of the EMERGENCY limit switch bar to the top end of the
mast must be a minimum of 1.25 m.
WARNING
Danger of injury
Operation without a correctly installed EMERGENCY limit switch
bar is prohibited.
EMERGENCY limit switch bars must be installed before
commissioning according to the following information.