GEDA
®
1500 Z / ZP
Page 79 of 114
Rev.: 004
BL 076 GB
Translation of the original operating manual
2011 / 03
15
Assembly
Safety instructions, assembly / transport
Precautionary measures stipulated by the company for avoiding
fires, explosions, dust, gas, steam and smoke (during welding,
burning and grinding work) must be observed.
Adhere to the stated torques. To do this use a calibrated torque
wrench.
Use appropriate lifting gear when working with heavy parts.
Adhere to the minimum requirements for thoroughfares, travel paths
and emergency exits.
Provide sufficient space for opening doors and covers.
Only carry out welding, burning and grinding work on the machine
after consultation and approval from GEDA.
Observe the reduced load-bearing capacity of the platform during
assembly.
Observe the mast anchor distances and trailing cable guides.
Observe the load capacity of the assembly crane.
Avoid mixing up/incorrectly re-assembling dismantled parts. Label
the parts.
In the event of wind speeds of > (45 km/h), bring the platform down
to the ground and cease operation.
WARNING
Life-threatening hazard
Raised load.
Do not stand under a suspended load.
Do not stand on a suspended load.
Only raise the load at the sling points.
Only use suitable hoisting gear.