GEDA
®
1500 Z / ZP
Page 34 of 114
Rev.: 004
BL 076 GB
Translation of the original operating manual
2011 / 03
4.10
Other applicable documents
In addition to this manual, the following documents must be observed by
the corresponding target group:
Instructions for the landing-level safety gates.
As necessary, instructions for the electrical modules of the landing-
level safety gates.
As necessary, customer service information.
Instructions from suppliers of purchased parts
These documents must be supplemented by the operating company with
the respectively valid, national regulations of the country of use. If the
machine is sold or passed on, the documentation must be passed on as
well.
4.11
Export licence
Parts of the machine/electrical control system can be subject to export
licences depending on the current status of foreign trade law. The
customer shall assume responsibility for acquiring the export licence and
only proceed in accordance with this licence.
4.12
Warranty
This manual does not contain any warranty agreements. They can be
found in the General Terms and Conditions of Business. Proper use is
a precondition for the warranty.
4.13
GEDA training sessions
GEDA conducts detailed training sessions in order to enable the highest
degree of safety and economic efficiency when operating the machine.
When the machine is delivered, the operating company and its personnel
will receive extensive instructions about the function, operation,
maintenance, servicing and troubleshooting. The operating company is
recommended to realise these training sessions. Please contact the
GEDA GmbH customer service department for information on training.
