GEDA 1500 Z/ZP, Operating Manual, Page: 66 / 114

GEDA
®
1500 Z / ZP
Page 66 of 114 Rev.: 004
BL 076 GB Translation of the original operating manual 2011 / 03
12 Operation
12.1 Daily inspections before starting work
To guarantee safety when working with the machine, the
supervisor/platform operator/person appointed by the operating company
is obliged to carry out a daily inspection of certain machine areas/parts.
Any defects identified must be reported immediately to a superior and
rectified. Faults may only be rectified by professionals responsible for
servicing and repairs.
Visual inspections must always be carried out before function checks.
Operation is prohibited until the defects are rectified. The following points
must be inspected daily.
12.1.1
Visual inspections
Entire machine

Damaged load-bearing elements/deformation.

Travel path of the machine unobstructed.

Loose or fallen parts

Damage to the platform.

Oil/grease leaks.

Discolouration and contamination, corrosion, cracks.

Green control light goes on.

No objects on collision grille (e.g. quarry etc.)
Warning and instruction notices

All present and legible.
Safety equipment

All present.

Functioning.

Not manipulated.
Switch cabinets

Burnt/scorched areas.

Discolouration.

Moisture.