Gearlinx™ User Guide v1.0
22
July 24, 2023
1.9 Restoring Factory Default
The erase button (on the power face) uses a button pattern to trigger a config erase/reset to factory
default. You will need a paperclip or something small and firm that can fit in the erase hole. To
perform the factory reset you follow these 4 steps in quick succession:
•
Depress the button for a second
•
release it for a second
•
depress it again for a further second
•
release
The unit will then immediately begin its factory reset routine, wiping all cryptographic keys and data
and returning its memory and state to factory default.
