temperature is the best test of doneness for many foods.
takes the guesswork out of cooking because the oven
switches the Hold setting after reaching the preset food temperature and
maintains that temperature until you either open the door or press the
pad.
The Temperature Probe
The temperature probe is a food
Temperature probes provided with
thermometer that gauges the
other products, such as those used
internal temperature of your food;
for ovens, are designed to
it must be used when using the
withstand high temperatures.
Temp Cook or Auto Roast
Use of probes other than the one
microwave oven functions.
provided with this product may
To use your probe properly
A temperature probe has been
result in damage to the probe.
in a roast, see the Automatic
provided for use in your new
Roasting section.
‘microwave oven.
How to Temp Cook a Rolled Beef Rib Roast to Medium
1. Insert the temperature probe into the roast and
attach the cable end of the probe securely into
the receptacle in the oven wall. Close the door.
2. Press the TEMP
pad.
5. Press the START pad. If the internal
START
temperature
of the
roast
is less than
80°F., the display will show “COOL”;
if the roast’s internal temperature is
-
TEMP
80°F. or above, the display shows the
COOK
temperature counting up.
When
is reached, the oven control signals
3. Press 1,2 and 5 to set
and “HOLd” will be on the display. The oven will
D
4. Press the POWER LEVEL pad.
then hold the temperature.
POWER
Press 5 to set medium power.
7. Press the CLEAR/OFF pad to stop the cycle.
LEVEL
8. Remove the probe and the roast from the oven.
Cooking Tips
●
Use a lower power level; it will heat food more
●
Be sure frozen food has been completely defrosted
evenly though requiring more time.
before inserting probe. The probe may break off if
●
Cover foods loosely for moisture control and quick,
you attempt to push it into frozen foods.
even
heating.
Questions
and Answers
Q. After I followed the steps and pressed the
Q. Why did “PRObE” flash after I touched the
START pad “ERROR” flashed on the display
START pad?
and the oven control signaled. What’s wrong?
A. “PRObE” will
if you don’t seat the cable end
A. “ERROR” flashes if you set the temperature either
of the probe securely into the receptacle in the
below 80°F. or above
The oven
you,
oven wall or if you press the TEMP COOK/HOLD
between the flashing of “ERROR,” what incorrect
and forget to use the probe. .
entry was made. To re-enter, press the
Q. Can I leave my probe in the oven if it’s not
pad and begin again.
inserted in the food?
A. No, if it touches the oven wall, damage may
occur to the probe and oven.
1’?
