Safety Instructions
Operating Instructions
Safety Instructions
Operating Instructions
Care and Cleaning
Troubleshooting T
ips
Customer Service
Before You Call For Service…
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem
Possible Causes
What To Do
Surface units will not
Improper cookware
•
Use pans which are flat and match the diameter
maintain a rolling boil
being used.
of the surface unit selected.
or cooking is not
fast enough
Surface units do
A fuse in your home may be
•
Replace the fuse or reset the circuit breaker.
not work properly
blown or the circuit breaker
tripped.
Cooktop controls
•
Check to see the correct control is set for the surface
improperly set.
unit you are using.
Tiny scratches (may
Incorrect cleaning
•
Use recommended cleaning procedures.
appear as cracks)
methods being used.
or abrasions on radiant
Cookware with rough bottoms
•
Be sure cookware bottoms and cookware are clean
cooktop glass surface
being used or coarse particles
before use. Use cookware with smooth bottoms. Tiny
(salt or sand) were between
scratches are not removable but will become less
the cookware and the surface
visible in time as a result of cleaning.
of the cooktop.
Cookware has been slid
across the cooktop surface.
Areas of discoloration
Improper cookware
•
Marks from aluminum and copper pans as well as
on the cooktop
being used.
mineral deposits from water or food can be removed
with the cleaning cream.
Plastic melted
Hot cooktop came into
•
See the
Special Care
information in the
Cleaning the
to the surface
contact with plastic placed
glass cooktop
section.
on the hot cooktop.
Pitting of the cooktop
Hot sugar mixture spilled
•
Call a qualified technician for replacement.
on the cooktop.
Frequent cycling
Improper cookware
•
Use only flat cookware to minimize cycling.
off and on of
being used.
surface units
The display goes
Power surge.
•
Disconnect power at the fuse box or circuit breaker
blank or indicator
for at least 10 seconds. Turn power on and power
lights come on when
up your range. If the indicator lights are still on,
range is not in use
call for service.
Clock and timer do
Plug on range is not completely
•
Make sure electrical plug is plugged into a live, properly
not work
inserted in the electrical outlet.
grounded outlet.
A fuse in your home may be
•
Replace the fuse or reset the circuit breaker.
may be blown or the circuit
breaker tripped.
Oven controls improperly set.
•
See the
Using the clock and timer
section.
23
