25
Installation and Setting into Operation
Installation
Installation and Setting into Operation
Notes on Installation
Observe the following points before installing the unit
•
Interrupt the power circuit and protect it from unauthorized switch-on.
•
Interrupt the cleaning medium supply line and secure the line against
being opened. There must not be any chemical cleaning medium in the
supply line.
•
Make sure that there are no foreign objects in the system.
•
Clean (rinse) the cleaning medium supply line before connecting the
orbital cleaner.
Installation
Requirement
x
We recommend that a dirt trap of 500
ϻ
m should be installed in the
supply line to ensure no foreign particles can penetrate into the machine.
x
When fitting, protect the orbital cleaner from tipping and twisting.
Carry out the following steps:
1.
Install the orbital cleaner in the tank.
2.
Make sure all fixing points are fitted correctly.
3.
Connect all media supply lines.
9
