GEA T.VIS P-15, Operating Instruction

Page: 4 / 66

6.6.2 Mounting to a Butterfly Valve T-smart 8000 32
6.6.3 Mounting to a Butterfly Valve T-smart 7 and a Mixproof Butterfly Valve T-smart 9 33
6.6.4 Mounting to ECOVENT Valves N_ECO and W_ECO 34
6.6.5 Mounting to VESTA Valve H_A/M 34
6.6.6 Mounting to VESTA Valve H_A 35
6.6.7 Fitting to an ASEPTOMAG Valve 36
6.6.8 Replacing Control Tops 37
7 Start-up 38
7.1 Safety precautions 38
7.2 Commissioning – Control Top with Solenoid Valves 38
7.3 Service Function 40
8 Operation and control 41
8.1 Safety instructions 41
8.2 Operating Overview 42
9 Cleaning 44
9.1 Cleaning 44
10 Maintenance 45
10.1 Safety precautions 45
10.2 Inspections 46
10.3 Removing the Control Top from the Valve 47
10.4 Dismantling the Control Top into its Components 47
10.4.1 Removing the Cap 47
10.4.2 Remove the circuit board 48
10.4.3 Install the circuit board 48
10.4.4 Removing the sensor module (9) 48
10.4.5 Removing the Solenoid Valves and the Control Plate 49
10.4.6 Removing the pneumatic block 50
10.4.7 Fitting the Pneumatic Block 50
10.4.8 Install valve plates 51
10.5 Maintenance 52
10.5.1 Replacing the Seals on the Base 52
10.5.2 Maintenance of Sound Absorber, Filter, Non-Return Valve and Exhaust Air Throttle 52
11 Alarms 54
11.1 Malfunctions and remedies 54
11.2 Carrying out a Reset – Back to Default Standard 56
12 Decommissioning 57
12.1 Safety instructions 57
12.2 Disposal 57
12.2.1 General notes 57
13 Spare parts list - control top type T.VIS P-15 58
14 Spare parts list - switch bar T.VIS P-15 60
15 Dimension sheet - control top type T.VIS P-15 62
16 Appendix 63
16.1 Lists 63
16.1.1 Abbreviations and terms 63
430BAL010747EN_3
4 24.07.2020