GEA OTC 3-02-137, Instruction Manual And Parts List

Page: 67 / 182

Westfalia Separator
Mineraloil Systems GmbH
67
2051-9001-010 / 1205
4.3 Maintenance and lubrication
•
Special care must be taken when performing maintenance and lubrication operations.
Conscientiously performed maintenance and lubrication operations improve the service life of
the separator.
•
In the case of accessories (motor, product pump, preheater, solenoid valve block etc.) the manu-
facturer’s maintenance and lubrication instructions must be observed.
4.3.1 Maintenance schedule
Operations
Remark
Maintenance
(1)
To assure correct functioning and operating safety:
•
pay attention to the following points during servicing:
–
Oil level
–
Temperatures
–
Pressures
–
Leakage
–
Vibrations
–
Current consumption
–
Starting time
–
Hose and hose pipes (see 4.3.2 ).
•
Before assembling, grease the guide and contact surfaces of the main bowl components.
(2)
Legend:
(1) = The specified maintenance intervals are recommendations which apply only for normal conditions.
Negative operating conditions (e.g. low-grade fuel, excessively high temperature, strong vibrations, frequent starting and stopping
of the separator etc.) can necessitate shorter maintenance intervals.
(2) = see section 4.3.4 - Lubrication schedule