manualshive.com logo in svg

GEA Omni, Instruction Manual

Introducing the Instant Omni - your ultimate kitchen companion! Achieve culinary excellence effortlessly with its innovative features and user-friendly interface. Unlock the full potential of your Instant Omni by accessing the comprehensive User Manual for free. Download it now from manualshive.com, and master your culinary skills with ease.

Share
Download
background image

 

D Task Note

This field may be used to enter details relating to the completion of the selected task. The information
entered here will be displayed in the 

Service Task

 description section of the main display.

 

E Service Levels

This section contains check boxes corresponding to each service interval. Selecting a box will add the
custom task to the list of required tasks for the given interval. The 

Check All

 option is displayed above

the checkboxes, which will add the task to all service intervals. Clicking the option a second time will
remove the task from all service intervals.

The buttons shown at the bottom of the display are used to add, remove or change custom service tasks. The
buttons are:

 

F New Service Task

Touching this button will clear all fields and allow the user to enter the details of a new service task. The
user will be prompted to select a name for the task, which will automatically be added to the options in
the drop down list.

 

G Delete Service Task

This button is only enabled when a service task is selected in the drop down list. Touching it will erase
the service task currently selected in the drop down list.

 

H Save Service Task

This button is only enabled when a service task is selected in the drop down list. Touching it will create
or edit the selected service task based on the information entered in the fields.

4.

Edit Service Intervals

This button is used to modify the amount of time the compressor must run before each service interval
comes due. Touching it will bring up the dialog box displayed below. Any of the existing service intervals
may be selected using the drop down list on the left. The hours of the interval may be changed by enter-
ing the desired interval into the text box to the right and touching the 

Save Service Change

 button. If the

Ignore Service Notifications

 option is checked, the panel will not annunciate notifications relating to serv-

ice intervals.

fig.82:

Service maintenance display

Instruction Manual | GEA Omni™
Control panel

User interface

Service

GEA Refrigeration North America, Inc. | E_806550_2 | Generated 12.01.2016

79

Summary of Contents for Omni















































































































































































































































Reviews:

No comments

Related manuals for Omni

Lawler 570 Installation Manual preview
570
Brand: Lawler Pages: 2
C3 Custom Coolers ROVER Owner'S Manual preview
ROVER
Brand: C3 Custom Coolers Pages: 16
Phytec phyCORE-MCF548x Hardware Manual preview
phyCORE-MCF548x
Brand: Phytec Pages: 104
Lika IF62 User Manual preview
IF62
Brand: Lika Pages: 28
Watts AMES 910GD-11 Installation, Operation And Maintenance Manual preview
AMES 910GD-11
Brand: Watts Pages: 12
tau D755M Installation Manual preview
D755M
Brand: tau Pages: 20
Danfoss DSV 1 Installation Manual preview
DSV 1
Brand: Danfoss Pages: 8
Beckhoff CX8080 Documentation preview
CX8080
Brand: Beckhoff Pages: 67
ENTRYPASS EP.MINI Wiring Manual preview
EP.MINI
Brand: ENTRYPASS Pages: 27
Omron K8AK-LS Manual preview
K8AK-LS
Brand: Omron Pages: 12
V2 WES-ADI Instruction Manual preview
WES-ADI
Brand: V2 Pages: 60
ENGGA EVC800i Installation & Adjustment Manual preview
EVC800i
Brand: ENGGA Pages: 8
Fagerhult SE - 566 80 Habo Quick Start Manual preview
SE - 566 80 Habo
Brand: Fagerhult Pages: 6
Flowserve AKH2 Technical Manual preview
AKH2
Brand: Flowserve Pages: 31
Maxon 688770 Hardware Reference Manual preview
688770
Brand: Maxon Pages: 64
ZPA Pecky, a.s. MODACT MTNED 15 Mounting Instructions preview
MODACT MTNED 15
Brand: ZPA Pecky, a.s. Pages: 48
WAGO 767-5401 Manual preview
767-5401
Brand: WAGO Pages: 94
Radarcan PORTABLE MOSQUITO REPELLER Quick Start Manual preview
PORTABLE MOSQUITO REPELLER
Brand: Radarcan Pages: 2

Brands by name

Popular brands

Load more brands