The values in the table display may be modified by touching the appropriate cell of the table. When-
ever a cell containing a time is touched, the sub-window below will be displayed.
fig.55:
Sequencer Timer Control Display
The value of the timer may be changed with the number pad, and the units may be changed with
the drop down list in the middle. If the
Apply to all Timers
box is checked, any change made to one
timer will affect all timers in the same column. The arrow keys may be used to navigate through the
table.
Whenever a cell in a condenser device column is touched, the sub window will instead appear as
shown below:
fig.56:
Compressor Device Control Display
The state the compressor should enter in the given step may be selected in the central options
block. For certain options which require a percentage of the maximum capacity to be specified, the
second options block will be enabled. A percentage between 0% and 100 %, incremented in values
of 5%, may be selected from this list.
2.9
OmniNet
User interface
OmniNet
Instruction Manual | GEA Omni™
Control panel
58
GEA Refrigeration North America, Inc. | E_806550_2 | Generated 12.01.2016
Summary of Contents for Omni
Page 1: ...Control panel GEA Omni Instruction Manual E_806550_2 ...
Page 238: ......
