Instructions for use and maintenance
This manual is owned by GEA Niro Soavi Any reproduction, even partial, is prohibited.
04C100-4C0
GEA Niro Soavi
75
4.5.2 Electrical hookup
The enclosure's power line must be sized according to the length, type of installation, ambient
temperature, nature of the load and in any case in compliance with the regulations in force in the
country of installation.
Unless otherwise agreed in writing with
GEA Niro Soavi
, the user is responsible for rating the power
line and earthing system to the electrical enclosure's terminal block, as well as selecting the short
circuit and contact voltage protection equipment.
If
GEA Niro Soavi
supplies the electrical enclosure, we also supply a list of cables rated for a length
of 50 metres, routed in closed ducting with three-pole cable and ambient temperature 40 °C.
With regard to the machine's power supply rating and connection diagrams, refer to the electrical
specifications and wiring diagrams given in the enclosed Technical Specifications Dossier.
CAUTION:
The specifications for the cables assume standard routing and environmental conditions; they
are only illustrative and must ALWAYS be checked by the user against the actual operating
conditions.
The electrical connections between the machine and electrical enclosure and electrical enclosure
and main power line are to be done by the Client, who is also responsible for ensuring that they are
made properly and in compliance with the diagrams before the machine is started up.
GEA Niro Soavi
is not liable for damage or injury resulting from incorrect connection of electrical
equipment; the electrical connections must always be checked over by qualified electricians.
In case of doubt, contact
GEA Niro Soavi
Service Department.
WARNING:
The power supply must be rated for the machine's maximum draw, as given in the Wiring
Diagrams in the enclosed Technical Specifications Dossier.
Summary of Contents for Niro Soavi One7TS
Page 2: ......
